Select your country
Wardrobes and other kinds of cupboards often have plenty of space for all your things, but their interior layout isn’t always very handy. By fitting an extra shelf in a new or existing cupboard, you can create new space to keep everything tidy. And if your storage needs change, it’s easy to add more shelves to give you even more space.
The first thing to do is take a look at what kind of shelves are used in your cupboard or wardrobe. Usually these are made of particle board with a veneer or laminated surface and a thickness of 16 or 18 mm. The shelves can be secured in different ways – often some or all of them are fixed to the side panels.
The shelf widths and spacings don’t need to be the same everywhere. You can vary them to meet your own storage needs, for example by alternating the shelf depths, or by putting in one or two shelves that are less deep.
The most commonly used material for cupboard or wardrobe shelves is particle board. This is often finished with a veneer or plastic laminate surface on both sides. Particle board tends to bend even when it’s only lightly loaded. Gluing or screwing a strip of wood to the front and back edges of the upper surface is often enough to make the shelf stronger and stiffer.
First check with a try square that the cupboard or wardrobe walls are at right-angles to the back panel, and the back panel is flat. Measure the width of the top or bottom shelf to find the width of the new shelf. Then you can order it ready to use, or you can cut it to size yourself using a hand saw or electrical saw.
If you’re using particle board with a veneer finish, the exposed edge after sawing isn’t so attractive. You can finish it using a matching iron-on veneer edging tape. Hold the tape in place and run over it with a hot iron so that it bonds to the edge of the shelf. Or of course you can cover the shelf with self-adhesive plastic foil, magazine pages or whatever you like.
The next step is to fit the shelf brackets. There are different types, check which ones are already used in your cupboard or wardrobe. Some of the most common types are:
• Wooden supports that are screwed to the side panels. These have the same length as the depth of the shelf.
• Adjustable shelf systems. Drill holes in the side panel (not too deep) and insert sleeves into which pins are pushed to support the shelf. Or of course you can insert pins or wooden dowels directly into the side panels.
• Fixed supports or brackets secured by screws or nails, both to the side panels and under the shelf.
Take care when marking the position of the supports on both side panels. If you just measure the distance from the top or bottom of the cupboard or wardrobe, that’s no guarantee that the shelf will be level. The best method is to put a spirit level on the shelf, hold it in place between the two side panels and mark off the right position. Or you can use an equal spacing between the two nearest shelves, measured from the top of the upper shelf.
Screw the supports to the side panels. Then place the shelf on the supports and use the awl to pierce small holes in the underside of the shelf. Screw the shelf into place using short, pointed screws.
You can reinforce the shelves with extra wooden strips made of the same material as the shelves themselves. If you fix the strip at the front edge of the shelf, it will make the shelf look thicker. Use white wood glue and secure the strip in place with one or more wood clamps or a few screws.
Andke samm-sammulisele juhisele hinne.
How to fit an extra shelf in your wardrobe
What tools do you need?
Nõuanded tööriista valikuks